Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Alpharetta?
A chimney liner replacement in Alpharetta typically runs $3,200 to $7,800, while a full chimney rebuild from the roofline up usually lands between $8,000 and $18,000. Most Alpharetta homeowners we serve pay around $4,500 to $6,500 for a stainless steel liner install in a two-story home, and about $9,000 to $14,000 for a partial or full masonry rebuild. These are real numbers from the Alpharetta market in 2026, not national averages that miss what local labor and materials actually cost here.
To be straight with you about the spread: a liner on a single-story ranch in home neighborhoods like Windward or Crabapple will sit at the lower end. A rebuild on a tall chimney with custom brick matching in a subdivision like The Manor or Country Club of the South will push toward the top. Call us at (762) 600-1468 and we’ll give you a written price before any work starts.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here are the line items as they actually show up on an Alpharetta invoice. These ranges reflect what our crews and our competitors are charging in this market right now.
| Service | Typical Alpharetta Price Range | What You’re Paying For |
|---|---|---|
| Stainless steel liner (single-story) | $3,200 – $4,800 | DuraFlex or Olympia liner, connectors, top plate, labor |
| Stainless steel liner (two-story) | $4,500 – $6,500 | Same as above, plus ladder or lift access |
| HeatShield cerfractory (celiner) | $3,800 – $5,800 | Ceramic coating applied to existing clay tile if the tile is intact |
| Partial chimney rebuild (top 3-5 courses) | $3,500 – $6,000 | Brick removal and relaying, new crown, flashing repair |
| Full crown replacement | $1,200 – $2,400 | Pour new concrete crown with drip edge |
| Full chimney rebuild from roofline | $8,000 – $18,000 | All brick removed and relayed, new liner, crown, flashing, cap |
| Brick spalling repair (face only) | $1,500 – $4,000 | Remove and replace damaged face brick without touching the structural core |
| Chimney cap replacement | $450 – $950 | Stainless steel cap, typically Copperfield or Famco |
These numbers are not a stand-in for an actual quote, but they give you a real bracket so no one can show up and surprise you with a five-digit number that should have been four. The biggest cost drivers are height, brick matching difficulty, and whether the existing flue tile can be lined with HeatShield instead of being torn out.
When we install a liner, we specify our materials by job. That means a DuraFlex 316L liner for a wood-burning fireplace, a heavier 304 grade when it makes sense, Gelco insulation wrap when code requires it, and Olympus or Copperfield caps to finish the top. We don’t swap in cheaper materials to hold a margin. The written price you get is the written price you pay.
What Affects Chimney Liner & Rebuild Pricing in Alpharetta
- Chimney height and roof pitch. Alpharetta is full of steep-roofed two-story colonials and craftsman-style homes with 10/12 and 12/12 pitches. A taller chimney on a steep roof means more ladder work, more safety rigging, and more labor hours. A single-story ranch on a gentle slope is a different job entirely.
- Brick matching. This is big in Alpharetta. Neighborhoods like Windward, Foxworth, and the older streets around downtown Alpharetta use specific brick blends that have been out of production for 20 or 30 years. Matching that brick takes time and often means sourcing reclaimed brick at $2 to $4 per brick on materials alone.
- Condition of the existing flue tile. If the clay tiles are cracked but essentially intact, HeatShield cerfractory resurfacing can preserve the tile and avoid a full liner removal. If the tiles have collapsed or shifted, the flue has to be broken out, which adds $600 to $1,200 to the job.
- Whether the crown is gone. A cracked or dissolved crown is the most common entry point for water in Alpharetta chimneys. If the crown has failed, it gets replaced as part of the liner or rebuild scope, which is a sensible add while we’re already on the roof.
- Code requirements. Alpharetta enforces the International Residential Code with local amendments. A wood-burning fireplace insert requires an insulated liner, and a gas appliance requires a properly sized liner rated for its BTU output. Skipping this is not an option, and doing it right costs what it costs.
- Access. Some Alpharetta homes, especially older lots near downtown or along the Chattahoochee, have tight side yards or mature trees right up against the chimney. When we can’t set a ladder cleanly, we bring in a lift, and that adds $400 to $900 to the job.
Signs You Need a Liner or Rebuild (Before You Get a Price)
You don’t need to be a chimney technician to know when something is off. Here’s what our crews typically find when Alpharetta homeowners call us out for an inspection.
- White staining on the brick face. That’s efflorescence, and it means water is moving through the masonry. Behind that stain is usually a failed crown, missing cap, or spalling brick.
- Crumbling mortar joints. Run your finger along a mortar joint. If it grinds away like sand, rain has been working on it for years. That’s the early stage of a rebuild.
- Flakes of clay tile in the firebox. When the terracotta liner starts to spall, pieces drop down into the firebox. That’s the canary in the coal mine. Once the tile is compromised, exhaust gases can leak into the wall cavity.
- Smoke backing up into the room. A liner that has lost its integrity won’t draft properly. If your fireplace has started smoking on startup, the flue is a likely culprit.
- Rust on the damper or firebox walls. That’s a sign water has been coming down the chimney for a while. Where water goes, a liner eventually goes too.
If any of these match what you’re seeing, don’t wait for the full failure. A liner that’s actively leaking combustion gases is a carbon monoxide risk. That’s not a term we throw around. Homes in Alpharetta get CO detectors for a reason, and a damaged flue is exactly the kind of condition they’re built to catch. If you suspect any of this, call (762) 600-1468 and we’ll inspect it. The estimate is free.
Stainless Liner vs. HeatShield vs. Full Rebuild: What You Actually Need
Not every damaged chimney needs a rebuild. In fact, a lot of the rebuilds quoted in this market could be resolved with a liner. Here’s how the three main repair approaches break down for Alpharetta homes.
Stainless Steel Liner (DuraFlex or Olympia)
A stainless liner is the right call when the original clay tile has failed but the chimney structure itself is sound. We size the liner to the appliance: a wood-burning fireplace gets a different diameter than a gas log set or a furnace flue. The liner is dropped down from the top, connected at the appliance collar, and capped. For gas appliances, the liner gets insulated to maintain flue gas temperature and prevent condensation. This is the most common liner job we do in Alpharetta, and it usually runs $3,200 to $6,500 depending on height.
HeatShield Cerfractory Resurfacing
HeatShield is a ceramic compound applied to the interior of the existing clay tile. Think of it as a structural liner that bonds to what’s already there. It works when the tiles are cracked but still aligned, and it preserves the original flue dimensions. The product is tested to UL 1777 and listed for use in masonry chimneys. It runs slightly less than a full stainless install in most cases, usually $3,800 to $5,800 for a standard fireplace flue in Alpharetta.
Full or Partial Masonry Rebuild
A rebuild is the only real answer when the brick itself has failed. That means spalled faces, leaning, cracked structural columns, or mortar joints so far gone that the chimney moves under hand pressure. We remove the brick down to sound material, relay it, install a new liner, pour a correct crown with a drip edge, and cap it. This is the biggest job, and it’s the one where brick matching in Alpharetta makes the price move the most.
How to Save on Chimney Liner & Rebuild
Saving money on a chimney repair doesn’t mean cheaping out on materials. It means choosing the right scope. Here’s how our Alpharetta customers keep the bill down without leaving their chimney unsafe.
- Get an inspection before you assume the worst. A $250 inspection often reveals that a liner, not a rebuild, is the fix. Homeowners who call around quoting rebuilds before anyone has looked at the chimney sometimes pay for five times the scope they needed.
- Address crown and cap issues early. The crown and cap are the first line of defense against water. Replacing a cap for under $1,000 beats a $5,000 rebuild caused by years of water intrusion.
- Bundle the work. If your chimney needs a liner and a crown, doing them together saves on mobilization, equipment setup, and time. A combined scope is usually 10-15% less than doing them separately.
- Ask about HeatShield when the tile qualifies. Not every tree-safe chimney has flue tile in good enough shape for cerfractory, but when it does, it is often the most cost-effective liner solution.
- Get a written price before anything starts. This is how Flint Chimney Co Alpharetta runs every job, and it is the only way to compare apples to apples across companies in this market. A verbal estimate over the phone is not a bid. Call (762) 600-1468 and we’ll send a technician out to measure the chimney and hand you a number in writing.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Alpharetta in 2026?
A stainless steel chimney liner in Alpharetta typically costs $3,200 to $6,500 installed, depending on chimney height and whether the liner needs insulation. Single-story installations sit at the lower end; two-story homes on steep lots run higher. Call (762) 600-1468 for a written quote specific to your flue size and roofline.
Is it cheaper to repair or rebuild a chimney in Alpharetta?
Repair is almost always cheaper than rebuild: a liner replacement runs $3,200 to $6,500 while a full rebuild starts around $8,000. The deciding factor is whether the brick structure itself is sound. If it is, you hire a liner. If it’s not, rebuilding is the only safe option, and paying for a liner on a failed structure is throwing money away.
How long does a chimney liner last?
A properly installed stainless steel liner lasts 15 to 25 years, and a HeatShield cerfractory resurfacing carries a 20-year material warranty from the manufacturer. Our installation is guaranteed in writing for one full year through the 365-Day Done Right Promise, and if a covered repair fails within that year, we return at no charge.
Can you do a chimney liner or rebuild the same day?
A liner install is usually a single-day job. A full rebuild takes two to five days depending on height, brick availability, and weather. In Alpharetta, our schedule runs about one to two weeks out for non-emergency liner work. Call (762) 600-1468 and the person who answers can tell you the next open window.
Does homeowners insurance cover chimney liner replacement or rebuild?
Most Alpharetta homeowners policies cover chimney damage that results from a covered peril, like a falling tree in a storm or lightning strike. They do not cover damage from normal wear, age, or deferred maintenance. We can write up a scope of work and condition report for your adjuster if you’re filing a claim.
What happens if my chimney liner has a crack and I keep using the fireplace?
You’re running a risk with carbon monoxide and with chimney fire. A cracked liner lets heat and combustion gases reach the framing around the chimney, and in Alpharetta homes built with wood framing that is a fire hazard. If your liner is cracked, stop using the fireplace until it’s inspected. Call (762) 600-1468 and we’ll get a technician out to assess it.
Alpharetta Chimney Liner & Rebuild: Why the Price Is What It Is
Alpharetta homes have their own character, and that character shows up in the chimney work. The housing stock here skews toward 1980s and 1990s two-story brick-front colonials with steep roof pitches and traditional masonry fireplaces. That means taller chimneys, more complex flashing, and brick colors that are no longer in production. The labor cost is what it is because you cannot do this job from the ground, and you cannot fake a matched brick.
We have been doing this work in this market since 2002, as part of the Garrison Partners family of independently owned chimney service companies. That network runs on a shared operating standard we call The Garrison Standard, and a shared code of conduct we call The Garrison Code. It means the same written-pricing rule, the same 365-Day Done Right Promise, and the same background-checked, uniformed technicians show up whether you call us in Alpharetta or a Garrison Partner in another city.
What that means for your liner or rebuild: the price is in writing before any work starts, the scope is written down, and the guarantee is on paper for a full year. If the repair fails within that year, you get a free second visit. No charge, no argument.
We use the materials we use because they hold up: DuraFlex liners, HeatShield cerfractory, Gelco insulation products, Olympia Chimney components, Famco caps, and Copperfield stainless tops. None of that is off-brand. You can look up every one of those names and verify what you’re paying for.
If you’re at the point of needing this work done, call us at (762) 600-1468. A live person answers, day or night, which is more than most trade companies in this market can say. We’ll set a time, send a technician who shows up in a marked vehicle with a clean uniform and a background check on file, and hand you a written price before any work starts. If the price doesn’t work for you, that’s fine. You’ll still have a real number to compare against, which is more than a phone estimate ever gives you.
Pricing reflects the Alpharetta market as of 2026. Flint Chimney Co Alpharetta offers free estimates – call (762) 600-1468.
Written by Hank Delano, Owner at Flint Chimney Co Alpharetta, serving Alpharetta since 2002.
What Our Customers Say
"Good work on the damper replacement. Had to wait for a part for a few days, but they stayed in touch."
- Glenn D."Level 2 inspection before we bought the house. Report was detailed and saved us from a bad surprise."
- Archie M."Chimney repair on loose bricks near the top. Tuckpointed it so it matches. Looks right."
- Rosa H.