HeatShield Chimney Sweep Nationwide

HeatShield Chimney Sweep in Alpharetta: What to Know First

A HeatShield chimney sweep in Alpharetta typically runs $189 – $289 for a standard cleaning and inspection, and most jobs are completed same-day once we’re on site. We’re an independent HeatShield service provider, which means we work on your system without being tied to any manufacturer’s sales channel. If you own a home near Avalon, Windward, or Crabapple and your HeatShield liner has been in service for more than a couple of seasons, this page will tell you exactly what to expect, what it costs, and what can safely wait.

Call (762) 600-1468

Call (762) 600-1468 and you’ll get Hank Delano or one of our crew on the phone. We’ll tell you the ballpark price before anyone schedules a visit, and we’ll put the final number in writing before any tool comes off the truck.

How HeatShield Products Fail – and How We Fix Them

HeatShield makes a ceramic refractory coating system that’s pumped into existing chimney flues and then cured with inflatable molds. It’s a solid product, but it has specific failure modes that show up in Alpharetta’s climate. Here’s what we see most often:

• Cerfractory Flake-Off at Liner Crowns. HeatShield’s Cerfractory material can separate at the top of the liner where it caps off, especially after repeated freeze-thaw cycles. Georgia winters aren’t brutal, but Alpharetta gets enough nights below 30°F that older HeatShield installations from the mid-2000s show hairline cracking at the crown. Our sweep includes a close inspection of this zone, and if we find flaking, we document it with photos before recommending patching.
• Creosote Bonding to Rough Cerfractory Surfaces. HeatShield liners have a slightly textured surface compared to smooth stainless steel. That texture grabs creosote faster, especially in unlined fireplace flues that see wet or unseasoned wood. We see third-stage creosote clinging to HeatShield-coated flues in Alpharetta homes where the owner burns pine or mixed hardwood that hasn’t fully dried. The fix is more frequent cleaning, not a new liner.
• Joint Seam Ghosting at Original Flue Tile Gaps. When HeatShield is pumped over existing clay tile flues, the original tile gaps can telegraph through as raised seams. Over time, those seams collect soot unevenly and become hotspots. We check every seam with a Level 2 camera inspection during the sweep, because this is where minor defects turn into smoke leaks.
• Blowout Patches from Previous Repairs. If a prior chimney company patched a cracked flue tile with refractory mortar before the HeatShield was applied, that patch can fail independently under heat stress. The HeatShield coating is only as good as what’s beneath it. When we find a soft patch, we remove the degraded material and re-coat with compatible refractory before it compromises the rest of the liner.
• Mold Collapse During the Curing Process (Installation Defects). HeatShield is installed by inflating a mold inside the chimney, pumping the Cerfractory, then deflating the mold once it cures. If the original installer deflated too soon or used an undersized mold, you’ll get thin spots, pin holes, or collapsed sections that trap water and creosote. We’ve found these defects in Alpharetta homes where the HeatShield liner is less than five years old. A camera inspection catches them before they become a smoke spill problem.

Hank Delano puts it plainly: “Tell me what’s in the flue, and I’ll tell you what it takes to fix it.” On a HeatShield liner, the fix is usually a careful cleaning plus a documented patch or seam repair, not a tear-out.

Our HeatShield Chimney Sweep Process

1. 1
   The call. You reach a live person at (762) 600-1468. We ask what you’re burning, when the last sweep happened, and whether you’ve noticed any smoke smell inside the house. We give you the ballpark price right then.
2. 2
   The arrival. The tech shows up in a uniform, with a background check on file. He walks the firebox, the damper, the roof cap, and the liner from both ends before any equipment comes out.
3. 3
   Camera check. We run a Level 2 camera inspection through the full flue length. On HeatShield liners, we’re looking specifically at the crown, the tile seams, and any patch zones. You see the footage.
4. 4
   The written quote. If the sweep is all you need, the price is the price you already approved. If we find a failing seam or a thin spot, we write up exactly what’s wrong, what it costs, and what can wait. Nothing starts without your sign-off.
5. 5
   The work. We clean with brushes sized to the HeatShield coating, not the original tile dimensions. That matters because ceramic liners are thinner than you’d expect, and the wrong brush can score the surface. We remove creosote, soot, and any nesting debris.
6. 6
   Post-clean verification and the guarantee. We re-run the camera, show you the clean flue, and leave you with a written report. If we repaired anything, it’s covered by the 365-Day Done Right Promise, in writing, for a full year.

What HeatShield Chimney Sweep Costs in Alpharetta

Numbers you can actually plan around:

• Standard sweep with Level 1 inspection: $189 – $249 depending on flue height and creosote load.
• Sweep plus Level 2 camera inspection: $289 – $389. We recommend this every other season for HeatShield liners because of the seam and crown issues described above.
• Heavy creosote removal (stage 2 or 3 buildup): $325 – $450. Adds rotary chain or chemical treatment time.
• Patching a failed HeatShield seam or small crown defect: $400 – $900 depending on access and material volume.
• Full re-coat of a HeatShield liner: $2,800 – $4,500. This is a liner replacement scenario, not a sweep, and we only quote it when camera footage proves the existing coating has failed beyond patching.

What moves the price: two-story vs. one-story roof access, how long it’s been since the last sweep, and whether the liner is straight or multi-offset. Call (762) 600-1468 for an exact quote. Estimates are free, and the written price you approve is the number on the invoice.

Why Alpharetta Homeowners Call Flint Chimney Co Alpharetta for HeatShield Work

We’ve been part of the Garrison Partners family since 2002, and we operate under The Garrison Standard: written price before any work begins, a written guarantee on every repair, and a live person on the phone around the clock. When we repair a HeatShield seam, that repair is covered for one full year. If it fails, we return at no charge. No argument, no re-quote.

The other reason homeowners in Alpharetta call us: we don’t only work on HeatShield. We install and service DuraFlex and Gelco products too, which means we’ll tell you honestly when a HeatShield liner has reached the point where a stainless steel reline makes more sense than another patch. We’re not married to one brand. Duluth, Roswell, Milton, and Johns Creek homeowners get the same straight answer from the same crew.

FAQs