Famco Chimney Sweep Nationwide

Famco Chimney Sweep in Alpharetta: What to Know First

A Famco chimney sweep in Alpharetta typically runs $189 – $289 for a standard cleaning with a Level 1 inspection included, and most jobs are completed in 90 minutes or less. We’re an independent Famco service provider, not a manufacturer-authorized shop, so we give you the straight read on what your Famco unit needs without any brand-loyalty blinders. If you own a Famco fireplace, insert, or chimney system and you’re seeing soot buildup, weak draft, or that sharp creosote smell when the weather turns, call (762) 600-1468 and we’ll get you on the schedule.

Call (762) 600-1468

How Famco Products Fail – and How We Fix Them

• Famco stainless steel chimney caps with clogged mesh screens. Alpharetta’s spring pollen season is brutal on cap screens. Famco caps use a fine-mesh design that traps pollen, cottonwood, and pine needles faster than most. Once the mesh clogs, draft drops and smoke backs up into the room. We pull the cap, clean the mesh with a stiff brush and compressed air, and re-seat it. If the screen is rusted through, we recommend a replacement cap rather than trying to patch it.
• Famco clay-tile flue liners cracking from Alpharetta’s freeze-thaw cycle. Older Alpharetta homes near Crabapple and downtown still run original clay-tile liners, and Famco systems from the 1980s and 1990s used clay tile almost exclusively. Georgia winters don’t get brutal, but we do get enough freezing nights that moisture in the tile expands, cracks the flue, and lets heat reach combustible framing. We spot this during a Level 2 inspection. If the tile is cracked, we quote a HeatShield resurfacing job or a DuraFlex stainless liner, not a patch.
• Famco fireplace dampers that seize from creosote buildup. The damper is the metal plate that closes off the flue when the fireplace isn’t running. On Famco units, creosote condenses on the damper hinge and hardens like road tar. You’ll know it when the lever won’t budge or the damper won’t seat fully. We use a creosote-dissolving spray, let it sit, then work the damper open and closed until it moves clean. We don’t force it; a broken damper hinge means a full damper replacement.
• Famco prefab fireplace refractory panels spalling. The refractory panels are the concrete-like walls inside a factory-built Famco fireplace. After years of heating and cooling, they crack and flake – something we see regularly in Alpharetta homes built in the 1990s and early 2000s. Flaking refractory sends bits of grit into the firebox and eventually exposes the metal shell behind it. We replace panels with OEM-spec or equivalent refractory materials, never with generic firebrick that doesn’t fit the Famco housing.
• Famco wood stove flue collars leaking at the connection point. This one’s common on Famco wood stoves installed in north Fulton basements and workshops. The collar where the stovepipe meets the chimney can pull slightly out of round, letting smoke seep into the room. We check the alignment and seal on every Famco wood stove sweep. If the collar is deformed, we either re-round it or quote a replacement collar, depending on how far out it is.

Our Famco Chimney Sweep Process

1. 1
   Call and book. A live person answers at (762) 600-1468, asks about your Famco unit’s age and last sweep date, and gets you on the board. No callback forms.
2. 2
   Arrival and setup. Our tech shows up in a marked van, in uniform, background-checked. We lay drop cloths around the hearth and seal the firebox opening before anything starts.
3. 3
   Hands-on inspection. Before we run a brush, we look at the damper, the firebox, the cap, and the accessible flue. This is where we catch cracked tiles, spalled refractory, or a seized damper before the cleaning stirs anything loose.
4. 4
   The sweep itself. We run the right brush for your Famco flue size, top to bottom, pulling creosote and soot into the firebox and out through our vacuum, not into the room.
5. 5
   Written report and price. You get a written summary of what we found and a written price for any recommended repair before any work goes forward. If it’s not a problem, we say so.
6. 6
   Cleanup and guarantee. We leave the hearth cleaner than we found it. Any repair we do carries the 365-Day Done Right Promise in writing, valid a full year.

What Famco Chimney Sweep Costs in Alpharetta

A standard Famco wood-burning fireplace sweep in Alpharetta runs $189 – $289 depending on flue height, creosote stage, and whether the cap and damper need extra attention. If we’re dealing with a factory-built Famco prefab with spalled refractory panels, panel replacement adds $175 – $400 per panel depending on the model. A Level 2 inspection (the one that runs a camera down the flue) is $125 – $250 when it’s not bundled with a sweep. What moves the price the most: stage-three glazed creosote that requires chemical treatment and extra brush passes, or a clay-tile liner that’s already cracked. We hand you the number in writing before any work starts, so there’s no door-knock arithmetic. Call (762) 600-1468 and we’ll quote your exact Famco setup for free.

Why Alpharetta Homeowners Call Flint Chimney Co Alpharetta for Famco Work

We’re part of the Garrison Partners family, founded in 2002, and we operate under the same code every Garrison location follows: written price before work, background-checked technicians, and a live person on the phone around the clock. That matters when you own a Famco product, because not every chimney company keeps up with Famco-specific failure patterns. We do. And when a Famco flue needs more than a sweep, we’re already working with the right materials – HeatShield for resurfacing, DuraFlex for stainless liners, Gelco for chase covers – so the fix isn’t a compromise part. Hank Delano has been running chimney work long enough to know the difference between a flue that needs cleaning and a flue that needs to come apart. That’s the read you get when he’s on the roof.

FAQs