Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Johns Creek
A chimney inspection in Johns Creek typically costs between $149 and $349 for a Level 1 or Level 2 inspection, depending on what’s being looked at and why. If you’re buying or selling a home near State Bridge Road or off Medlock Bridge, you’ll usually need a Level 2, which runs closer to $249 to $349 and includes camera work. Our crews travel to Johns Creek daily, so call (762) 600-1468 and we’ll get you on the schedule with a written price before any work starts.
Why Flint Chimney Co Alpharetta Is Johns Creek’s Preferred Chimney Inspection Company
Most of the chimneys we inspect in Johns Creek belong to homes built between 1985 and 2010, and we’ve learned exactly what goes wrong with them. Factory-built fireplaces from that era were installed with thin galvanized steel caps that rust through in about 15 years. Our technicians know to look for that specific failure before anything else. When we pull up to a home in the Farmbrook subdivision or near Jones Bridge Road, our first glance goes to the cap, because the rust pattern tells us more about the chimney’s history than the homeowner’s summary ever could.
Every inspection comes with the 365-Day Done Right Promise, written and handed to you before the technician leaves. If a repair we recommended and completed fails within one year, we return at no charge. That’s the Garrison Standard, and it applies to every Chimney Inspection job we do in Johns Creek, no exceptions. You’ll also know exactly who’s walking through your door: background-checked, uniformed technicians, every time.
Our phones are answered by a live person around the clock. Book a Johns Creek inspection at midnight if you need to. You’ll get a real person, a real appointment window, and a written price before any tools come off the truck.
Styles & brands we work with
Level 2 Chimney Inspection in Johns Creek
A Level 2 Chimney Inspection in Johns Creek is what we recommend for any homeowner in a 1980s-2000s subdivision who hasn’t had their factory-built fireplace opened up in the last few years. This is the inspection that uses a camera to look up the full length of the flue, not just what’s visible from the firebox. In Johns Creek, where prefabricated chimneys are the norm in planned communities along Old Alabama Road and McGinnis Ferry, that camera work is what catches hidden chase damage, cracked flue liners, and rusted components before they cause a chimney fire.
Expect to pay $249 to $349 for a Level 2 in Johns Creek. The written price covers the full camera inspection, a condition report with photos, and our recommendations in plain English. You approve the number before we begin, and that number doesn’t move.
When Johns Creek Homeowners Need This Level
You’ve just bought or sold a home. You’ve had a chimney fire, even a small one. You’ve changed fuel type. You’ve had a major weather event, and May thunderstorms in Johns Creek are a common trigger. Or your home sits in an older section with a masonry chimney and clay liner that’s been absorbing humidity for 25 years. Any of these qualifies.
What the Camera Shows in Factory-Built Chimneys
The camera shows what your eyes can’t: the condition of the prefabricated flue liner joints, whether the chase top has rusted through, and whether first-degree creosote is coating the smoke chamber walls. Last fall we inspected a home in the Medlock Bridge subdivision where the fireplace had a warped damper and a rusted Olympia Chimney cap. The prefabricated flue liner was intact, but the chase top had failed, letting water run down into the firebox and leaving first-degree creosote on the smoke chamber walls. We replaced the cap with a stainless DuraFlex unit and sealed the chase, then documented the repair so the homeowner could avoid a chimney fire next season.
Chimney Leak in Johns Creek
A Chimney Leak in Johns Creek is most often a failed chase top or flashing, not a roof problem, and we tell homeowners that plainly before recommending any work. High humidity and heavy spring rains push water through rusted galvanized caps and deteriorated flashing on hundreds of Johns Creek prefabricated chimneys every year. We find the exact entry point with a camera inspection and show you the photos. You’ll know what’s leaking, why it’s leaking, and what it costs to fix before you spend a dollar.
A leak inspection plus repair in Johns Creek typically runs $149 for the diagnostic, with common repairs like chase top replacement or flashing resealing adding $300 to $800 depending on the chimney’s height and access. The written quote covers everything. If we recommend a repair you can safely defer, we’ll say that too.
Chase Top Failure, Not a Roof Leak
Water stains on the ceiling around your fireplace in a 1990s Johns Creek home usually mean the chase top failed, not the roof. The chase is the framed box surrounding the prefabricated flue pipe. When the cap rusts through, rain runs straight down around the pipe, behind the siding, and onto your ceiling. The roof can be perfectly fine.
Repairs We Recommend After Finding a Leak
Depending on what the camera shows, we may replace the chase top with a stainless unit, reseal the flashing with the correct material for the chimney’s penetration, or install a HeatShield liner if the prefabricated flue has degraded beyond safe use. We stock common parts for Johns Creek’s housing stock, so turnaround is usually the same week.
Trusted Brands We Service in Johns Creek
We work with chimney brands you can verify independently: DuraFlex for stainless liners and caps, HeatShield for flue resurfacing, Gelco for commercial-grade repairs, and Olympia Chimney for factory-built fireplace components. When a Johns Creek home built in the 2000s needs a replacement cap or a new damper, we can source a manufacturer-specific part instead of forcing a generic fit. That matters, because prefabricated chimneys have tighter tolerances than old masonry, and a wrong-size cap leaves the chase open to rain and squirrels. We keep common Olympia and DuraFlex parts on hand for fast Johns Creek turnaround.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Inspection Problems We See in Johns Creek Homes
- Rusted original galvanized caps. In Johns Creek subdivisions built from the 1980s through the 2000s, the original caps were thin galvanized steel that rusts out within 15 years. From the street, the cap looks intact; up close, it’s letting rain and animals into the chase.
- Prefabricated chase flashing failures. After heavy spring rains, the flashing where the chase meets the roof separates and lets water stain ceilings around the fireplace. Homeowners call a roofer first, and the roofer correctly sends them to us.
- Warped dampers in newer homes. Factory-built dampers warp from heat exposure even when the home is only 20 years old. A warped damper lets conditioned air escape year-round and can backdraft smoke during winter freezes.
- First-degree creosote buildup. Johns Creek’s humidity accelerates creosote adhesion on smoke chamber walls, even in fireplaces used only a handful of times each winter. That’s a chimney fire waiting on a spark.
Pricing for Chimney Inspection in Johns Creek, GA
A Level 1 inspection in Johns Creek runs $149 to $199. A Level 2 with camera work runs $249 to $349, and that’s what most local homeowners need given the age of the housing stock on this side of the metro. Level 3 inspections, which involve opening walls or removing masonry, are quoted per job and only recommended when the Level 2 camera work shows structural damage. A standard chimney sweep bundled with an inspection adds $129 to $179. Every price is written down before work begins. Call (762) 600-1468 for a free estimate, and we’ll give you a number you can plan around.
We Also Serve Cities Near Johns Creek
Our technicians cover the surrounding area daily, including Alpharetta, Cumming, Lawrenceville, and Sugar Hill. If you’re just outside Johns Creek proper, call us. You get the same written pricing and the same one-year guarantee, whether you’re north of the river or just over the line into a neighboring ZIP. This is Johns Creek territory for us, and we treat it that way.
Serving Johns Creek, GA - Our Local Coverage Area
We’re based in the Johns Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in Johns Creek
Every year, even if you rarely use the fireplace. Homes built in the 1990s have original components that are now 25 to 35 years old, and galvanized caps from that era rust through well before the house shows any other sign of wear. A yearly inspection catches rust, leaking flashing, and creosote before they become expensive repairs. Call (762) 600-1468 to schedule one, and you’ll get a written price before we begin.
Because the original cap was thin galvanized steel, not stainless. Builders across Johns Creek’s planned subdivisions used the least expensive approved cap on thousands of homes, and Johns Creek’s humidity accelerates rust on exposed metal. A galvanized cap in this climate typically fails within 15 years, so a 15-year-old house with a rusted cap is right on schedule, not an outlier.
Yes, and in some ways more attention. Factory-built chimneys rely on manufacturer-specific parts that don’t tolerate substitutions, and a small rust hole in a chase top or a warped damper can go unnoticed because the fireplace is newer. We use the same camera equipment and the same report format for prefabricated systems as we do for masonry, because the failure modes are simply different, not fewer.
Yes, and that’s the whole reason we recommend inspections before the rainy season. A camera inspection shows exactly where the chase top has failed or the flashing has separated, long before water reaches the drywall. We’d rather replace a $300 cap in April than tell you in November that you need drywall repair as well. Call (762) 600-1468 and we’ll schedule the inspection before the next storm cycle.
First-degree creosote looks like a fine black or brown soot coating the smoke chamber walls, and sometimes it has a dull, flaky texture. It’s the earliest stage of buildup, and in Johns Creek’s humid climate it accumulates faster than in drier regions. Left alone, it becomes second-degree creosote, which is flaky and combustible. Any creosote is fuel for a chimney fire. We’ll show you the camera photos and tell you exactly when a sweep is needed. For an exact quote, call (762) 600-1468, estimates are free.
Written by Hank Delano, Owner at Flint Chimney Co Alpharetta, serving Johns Creek as part of the Garrison Partners family founded in 2002.