Famco Chimney Repair Nationwide

Famco Chimney Repair in Alpharetta: What to Know First

Famco chimney repair in Alpharetta typically runs between $300 and $2,800 depending on what’s actually wrong, with most jobs completed in a single visit. Real Famco repairs here are rarely about the cap or crown alone – we usually find the problem goes deeper, into the flashing or the masonry joints. As an independent Famco service provider, we’re not the manufacturer’s warranty arm, but we tell you exactly what failed, why it failed, and what it costs before we touch anything.

Call (762) 600-1468

This page is for Alpharetta homeowners with a Famco chimney cap, chase cover, or related component that’s stopped doing its job. If your Famco unit is leaking, rusting, or pulling away from the chase, call (762) 600-1468 for a written estimate.

How Famco Products Fail – and How We Fix Them

• Famco chase covers, especially older painted models. The most common failure we see in Alpharetta is a chase cover that’s rusted through at the corners where the metal bends. That bend point is where water pools. Once the cover goes, water drops straight down onto the firebox and damper assembly. We replace it with a custom-fabricated stainless cover when the original is beyond saving, or we’ll weld and seal a small rust hole if the surrounding metal is still sound.
• Famco multi-flue caps with failing mesh. The expanded metal mesh on older Famco caps loosens over time. When it does, squirrels and birds get in, and blocked flues follow. We’ve pulled nests out of Famco-capped flues in Alpharetta more than once. The fix is either re-securing the mesh with mechanical fasteners or swapping the cap for a new one with a lifetime mesh design.
• Improperly sized or installed Famco caps on older clay-tile flues. A Famco cap isn’t a universal fit. When the base doesn’t seat properly on an irregular clay tile, rain runs down the outside of the tile and into the chimney chase. We remove the cap, address the flue surface, and install the cap so it mechanically locks to the tile – not just sits on top of it.
• Galvanized Famco caps in Alpharetta’s humidity. Galvanized steel caps simply don’t last here the way they might in a drier climate. The humidity plus the heat-cycling from burning season accelerates corrosion. We see galvanized Famco units fail in as little as five years. Our standard upgrade is stainless or copper, and we tell you honestly when a galvanized replacement would be a waste of your money.
• Famco dampers with broken or missing set screws. The older top-sealing Famco damper models used small set screws that loosened under heat cycling. When the screws back out, the damper plate drops, draft goes bad, and the cable detaches. It’s a cheap part and a fast repair if we catch it early. If the damper plate itself is warped, replacement is the only honest option.

Hank Delano puts it plainly: “Tell me what’s in the flue, and I’ll tell you what it takes to fix it.” That’s how we approach every Famco job. We don’t guess and we don’t sell you parts you don’t need.

Our Famco Chimney Repair Process

1. 1
   You call (762) 600-1468. A live person answers, day or night. We take down what’s happening with your Famco unit and schedule a visit.
2. 2
   Written diagnostic. We arrive in a marked truck, introduce ourselves, and inspect the Famco component, the flue, and the surrounding masonry. If we need to get on the roof, we use proper fall protection. No exceptions.
3. 3
   Parts decision, in writing. We tell you whether OEM Famco parts or a quality aftermarket equivalent makes more sense for your situation. For discontinued Famco models, we source through our trade suppliers like Olympia Chimney or Copperfield. You see the price before we order anything.
4. 4
   The repair. We do the work with hand tools and proper fasteners, not whatever’s rolled around the truck since spring. When the repair touches the flue or firebox, we take pictures and show you them before we close up.
5. 5
   The test. We run a smoke test or visual verification depending on the job. You see the result.
6. 6
   The guarantee. Every Famco repair we perform carries a written 365-Day Done Right Promise. If it fails within a year, we come back free.

What Famco Chimney Repair Costs in Alpharetta

A few honest Alpharetta ranges for the Famco work we do most often:

• Famco cap replacement (standard single-flue, stainless): $325 – $625 installed
• Famco chase cover replacement (custom stainless): $600 – $1,400 depending on chase size and accessibility
• Famco damper repair or cable replacement: $180 – $390
• Full Famco cap + chase cover replacement plus masonry work: $1,500 – $2,800

What moves the price is access, chase size, and whether the surrounding masonry needs work at the same time. We write the number down before we start. Call (762) 600-1468 for a free estimate.

Why Alpharetta Homeowners Call Flint Chimney Co Alpharetta for Famco Work

Because we put it in writing. Every Famco repair gets a written price before we start and a written one-year guarantee after we finish. Our techs are background-checked and uniformed, so you know who’s on your Alpharetta property. We’ve been doing this since 2002 as part of the Garrison Partners family of chimney service companies, and we follow The Garrison Code on every job: document the diagnosis, show the customer the problem, and do the work the way you’d want it done on your own house.

We also work across the full range of quality brands – DuraFlex, HeatShield, Gelco – so if your Famco unit has a failure that a complementary product solves better, we’ll tell you that instead of forcing a patch. No upsell. Just a straight answer.

FAQs