Olympia Chimney Chimney Sweep Nationwide

Olympia Chimney Chimney Sweep in Alpharetta: What to Know First

If you own a home in Alpharetta with Olympia Chimney components, a professional chimney sweep typically costs between $189 and $275 for a standard fireplace, and we complete most Olympia Chimney sweeps in a single visit lasting 60 to 90 minutes. We’re an independent Olympia Chimney service provider, which means we work on the brand but we’re not tied to any manufacturer’s pricing or parts matrix. This page is for Alpharetta homeowners who have Olympia Chimney products in their venting system and want straight answers about cleaning, inspection, and what those components actually need to stay safe.

Call (762) 600-1468

Call (762) 600-1468 and a live person answers. We’ll give you a written price before any work starts.

How Olympia Chimney Products Fail – and How We Fix Them

After years of sweeping chimneys across Alpharetta, we see the same Olympia Chimney issues repeat. Here are the five most common failure modes, what causes them, and what we do about it.

• Olympia 6-inch stainless steel liners with flaking creosote at the tee. The tee at the base of the liner is where turbulence drops creosote out of the smoke stream. On Olympia liners that haven’t been swept in 3+ years, that creosote hardens into a glaze that a standard brush won’t pull. We use more aggressive mechanical removal followed by a camera check to confirm the liner wall is clean, because glaze left in place is a chimney fire waiting for a cold evening. Most Alpharetta homes with a wood-burning insert run this setup.
• Olympia zero-clearance refractories with hairline cracking at the firebox back wall. Zero-clearance units rely on the refractory panels to hold heat off the framing. In Alpharetta’s humid summers, panels absorb moisture, then the first fall fire stresses them. Hairline cracks in an Olympia refractory are often cosmetic, but if they deepen past 1/8 inch, heat can reach the jacket. During a Level 2 inspection we photograph the cracks and measure depth, then tell you plainly whether the panel can wait or needs replacement. We won’t sell you a panel over a cosmetic crack.
• Olympia top-sealing dampers that leak around the gasket. Top-sealing damper gaskets lose their seal after years of exposure to Georgia sun and rain. The symptom is a draft you can feel at the firebox in January, or water streaks down the flue after a storm. We clean the seating surface, check the gasket compression, and replace the gasket or the damper assembly if it won’t hold. A leaking damper drives up heating bills and lets Alpharetta’s wet spring air into the flue.
• Olympia multi-flue caps with bird nesting inside the mesh corners. Multi-flue caps have corners where the mesh meets the frame, and birds find those corners in spring. We’ve pulled chimney swift nests out of Olympia caps in Alpharetta neighborhoods near Will’s Park and Birmingham Falls. The fix is removing the nest, sweeping debris out of the flue below, and installing a finer mesh if the existing openings are large enough to let birds through. Leaving a nest blocks draft and builds a fire hazard out of dried grass and twigs.
• Olympia stainless steel caps with rust at the spot weld. Stainless steel shouldn’t rust, but spot welds create a heat-affected zone where the chromium oxidation layer breaks down. On Olympia caps we see rust at the welds within 5 to 8 years in Alpharetta’s rain cycles. We wire-brush the rust, treat the area, and if the weld is failing, we replace the cap with either an Olympia cap or a comparable aftermarket unit from Famco or Copperfield. We’ll tell you which we recommend and why the price differs.

Our Olympia Chimney Chimney Sweep Process

Every Olympia Chimney sweep we run in Alpharetta follows the same sequence. No surprises, no moving the price at the door.

1. 1
   Written quote before tools come off the truck. We inspect the visible system, note the Olympia components, and hand you a price. If the scope changes, the price changes on paper first, not after the work is done.
2. 2
   Protection first. We lay drop cloths from your doorway to the firebox, cover furniture within 10 feet, and run a HEPA-filtered vacuum at the firebox opening throughout the sweep.
3. 3
   Mechanical and brush sweeping matched to the liner type. For Olympia stainless steel liners, we use rotary cleaning with nylon or steel bristles sized to the liner diameter, never oversized steel that scores the wall. For clay-tile flues, we match the brush to the tile size and grade, because a mis-sized brush on an older clay flue chips tiles.
4. 4
   When we find something worth looking at, we show you the camera footage. If the sweep uncovers glaze, cracked panels, a loose damper, or water intrusion, we’ll run the camera and walk you through what’s on the screen. Nothing is recommended without evidence you can see. Tell me what’s in the flue, and I’ll tell you what it takes to fix it.
5. 5
   Parts decision, documented. If a repair is needed, we quote Olympia OEM parts or a professional-grade alternative like DuraFlex or HeatShield, with the price difference in writing. You choose. We’ll note which parts are covered under any remaining manufacturer warranty versus our one-year repair guarantee.
6. 6
   Cleanup and the 365-Day Done Right Promise. We leave the firebox as clean as it was before we started, or cleaner. Every repair carries a written guarantee valid for one full year. If a covered repair fails in that window, we return at no charge.

What Olympia Chimney Chimney Sweep Costs in Alpharetta

Here’s what Alpharetta homeowners can expect to pay for Olympia Chimney chimney sweep work with Flint Chimney Co. Prices are for a standard single-flue fireplace with accessible roof or chase-top access.

• Standard chimney sweep (Level 1 inspection included): $189 – $275. Most of our Alpharetta Olympia Chimney sweeps land around $220.
• Level 2 inspection with camera scan: $150 – $300 when booked with a sweep. Camera work adds real value on Olympia liners because glaze and hidden cracks don’t show on a mirror.
• Creosote glaze removal (mechanical rotary cleaning): $100 – $200 additional, depending on severity. Glaze on an Olympia liner is stubborn, and we won’t leave it half-removed.
• Olympia cap replacement with aftermarket equivalent (Famco or Copperfield): $175 – $425 installed, depending on size and access.
• Top-sealing damper gasket replacement: $90 – $160 including the gasket and seating cleanup.

What moves the price: roof pitch, chase height, how long since the last cleaning, and whether we’re doing a repair alongside the sweep. Call (762) 600-1468 for a free estimate, and the number we give you on the phone is the number on the written quote before work starts.

Why Alpharetta Homeowners Call Flint Chimney Co Alpharetta for Olympia Chimney Work

Hank Delano runs this outfit, and he learned chimney work the hard way: Los Angeles Trade-Technical College, then over two decades of hands-on time on roofs and in fireboxes. He’s swept Olympia Chimney systems from Avalon new builds to 1970s colonials near downtown Alpharetta with clay-tile flues that hadn’t seen a brush in ten years. What you get from Flint Chimney Co is a crew that knows the Olympia product line, shows up in uniform, and puts the price in writing before anything starts. We work under The Garrison Standard, the same code every Garrison Partners location follows: documented price, documented scope, documented guarantee. And we stock or can quickly source professional-grade backup brands: DuraFlex liners, HeatShield resurfacing, and Gelco products all show up on our trucks when they’re the right call. Since 2002, the Garrison Partners family has run on one rule: if it’s not in writing, it didn’t happen.

FAQs